Catalog products

Cyclone filter

  • Cyclone filter

    Click to view larger image

  • No need of filter replacement

    Any work materials

    High purification performance

    Extended coolant life

    ●DT18B Series, applied with cyclone technology, use no physical filters to remove the burden of filter replacement work, etc.

    ●Ecological series with long-life coolant and waste

    ●discharge reduction


Treatment chip material Iron, aluminum, cast iron, other metals in general
Treatment liquid Water-soluble coolant
Filtration precision 18µm×90%

Note: The filtration precision is the internally evaluated nominal value under the standard inflow pressure.

Clean monster

  • Clean monster

    Click to view larger image

  • Simple, low-cost

    Easy filter replacement (No need of tools)

    Visualized chip trapped condition

    Trapping of fine chips

    Long-life filter

    Processing capacity of severalfold as much as that of bag filter

    Extended coolant life

    ●Environment preservation, running cost reduction

    Prevents corrosion due to fine chip sediments within the tank to extend the coolant life.
    Filter cloths can be replaced quickly (in about 3 min), and can also be reused.

    ●Improved quality and operation rate

    Ability to capture fine chips that have conventionally been evaded capture reduces troubles, such as tool break and work seating failure, due to clogging of center through coolant with chips, leading to substantial reduction in defectives.

    ●Visual chip capture condition

    Filter clogging can be visually checked through the transparent case.


Treatment chip material Aluminum, iron, cast iron, non-ferrous metals, others
Filtration precision Approx. 10µm
Treatment liquid Water-soluble coolant*1
Treatment ability 15-30L/min*2

※1)Oil-based coolant of approx. 10cSt can also be filtered.
  Set the treatment flow rate to approx. 15L/min for operation.

※2)Treatment ability per filter。
  15L/min (coolant only for fine chips) to 30L/min (water-soluble coolant)

Note: Use as the secondary filtration mechanism for the liquid passed through the primary filtration mechanism (drum filter, etc.).
Do not apply pressure because the filter is of deadweight filtration type.


  • QRF

    Click to view larger image

  • High filtration precision

    Long-life, large-capture filter

    Extended coolant life

    Easy filter replacement (No need of tools)

    ●Coolant quality preservation

    Captures fine and light chips to prevent center-through coolant from being clogged with chips and troubles, such as work seating error.

    ●Environment preservation and running cost reduction

    Prevents in-tank chip deposition and coolant corrosion to extend the coolant life.
    The highly stretchy filter reduces clogging and captures a large amount of chips.
    Used filter can be reused by washing.
    The filter (filter cloth) can be replaced quickly (in about 3 min). Thanks to suction type, there is no possible accident of container burst.


    The filter unit can be carried around on a cart to provide filtration to in-factory tanks one by one (fixed type is also available).


Model QRF (Qyuro Filter)
Treatment chip material Aluminum, iron, cast iron, non-ferrous metals, others
Filtration precision Approx. 10µ
Treatment ability 1-70L/min*2
Treatment liquid Water-soluble coolant*1

※1)Oils of 10cSt or less can also be filtered.

※2)The treatment ability is dependent on the performance of the pump to be mounted.
  The filter capacity is limited to 70L.min.


  • JMK

    Click to view larger image

  • Extensive lineup

    Excellent dehydration ability

    High-precision filtration

    Improved reliability

    ●Extensive lineup to meet on-site space needs

    ●Excellent dehydration ability to reduce the coolant waste

    ●Forced drive of the squeezing roller to reduce slip-caused discharge failure

    ●High purification precision to realize the extension of coolant life.

    ●The mechanism for preventing sludge inflow into the drive unit to reduce troubles